Tech spec:
- Single stage
- 1/4 HP motor
- Pump speed 1440 rpm
- 220ml oil capacity
- 220v/50hz voltage
- Weight: 6.6kg approx
- 260x110x240 mm
- 0.05/5Pa Mbar
Using the pump with a chamber
We recommend a maximum of 15-20 minutes to run the pump and pull a deep vacuum It should take 10 minutes to pull the vacuum and then leave the pump running for another 10 minutes. After this initial pull you should see the vacuum drop as this is when most of the degassing occurs. The vacuum can be maintained for up to 100 hours or longer but the pump itself isn’t run continuously. Periodically let air in to your chamber to burst any bubbles and then pull the vacuum again, using the pump for another maximum of 20 minutes. This can be repeated intermittently and you can also flip your material as part of the degassing process.
Handy tips
– When using a vacuum pump with the chamber always ensure there is oil in the pump and that it is clean and changed regularly.
– Let the pump cool between uses and don’t have it running for prolonged periods of time.
– Afterwards ensure the pump and chamber valves are turned off in the reverse order of how you turned them on and disconnect the hose. Otherwise you may pull oil from the pump into the chamber.
Warnings
– Thoroughly research the processes when using these products
– Only intended for the use of people over age 18
Disclaimer
420PMUK sells only equipment manufactured to the highest standards and quality is assured in all our products
However, due to the chemical properties of butane there remains an element of risk in the operation. It is necessary for the users of such equipment to be aware of these risks and familiarise themselves with the instructions regardless of their level of experience. Due to the volatile properties of butane, there is an ever-present risk of danger in its use, and 420PMUK cannot be held responsible for any bodily harm or damage to property that may result from its usage with any of our equipment.
420PMUK urges all users to take necessary precautions before using our products, especially when the operation requires the use of dangerous substances.
420PMUK does not advocate the use of such equipment for the processing or production of any substances covered by the Misuse of Drugs Act 1971 or any subsequent relevant legislation. Products sold by distributors are sold on the understanding that they shall be used for legitimate purposes only, and are obliged to clarify that the usage of our products for any illegal purposes may result in police involvement and any appropriate penalties under law.